Rope gripper

Category：Rope gripper
Clicks：
Release time：2016/09/27
Online inquiry

Detailed introduction

Rope clamp

The elevator or the old elevator renovation projects with a rope gripper, apparently on the system and installed a set of heavy special speed limiter and a safety clamp will increase the cost of the car; two-way overspeed and bidirectional safe clamp, the room well space and the installation position of the limit is difficult to achieve; effect on the position of the traction wheel mode is applied in the elevator machine room, the application scope is relatively narrow. So for the transformation of the use of the elevator, a lot of steel wire rope to stop the way, that is, the use of rope to achieve over speed protection.

1, 2, reset reset screw; nut and shaft; 3, a sliding shaft guide groove; 4 sliding shaft; 5 sliding shaft lock hook and the lock hook; 6 support; 7, a lock hook support shaft; 8, trigger lever; 9, trigger lever shaft, 10 sliding shaft; the rotating shaft of the lock hook; 11 splint pilots; 12, before 13, after the splint; splint; splint after 14, 15, a connecting shaft; connecting rod; 16 clamping spring; 17

Lock hook torsion spring